Skip Navigation
Slitting

Slitting

You’d like to minimise waste and achieve the best-quality cuts while saving time and money?

We attach high priority to listening to and analysing your requirements so that we can offer you tailor-made solutions that help to improve your performance. Put us to the test and we will go out of our way to meet your needs.

With our substantial network and state-of-the-art machinery, we can handle impressive processing capacities for slit strips and blanks, depending on your needs.

We can slit carbon steel or stainless steel coils for thicknesses ranging from 0.3 to 16 mm, for widths of 7 to 1,820 mm (on request) and for a tensile strength of up to 1,400 MPa depending on the required dimensions as reconstituted or endless coils.

We can also slit carbon steel or stainless steel blanks ranging from the most standard to the most exotic products, for thicknesses ranging from 0.4 to 35 mm, widths ranging from 35 to 2,000 mm and lengths of up to 6,000 mm. For trapezoids, we guarantee a shear angle of approx. 35 degrees, offering a perfect surface quality.

In addition to slit strips and blanks, we also offer coils from our precision-rolling plants.

Precision hot-rolling

Cold re-rolling:

Cold re-rolling

Cold re-rolling is possible for thicknesses ranging from 0.5 mm to 4 mm and widths of up to 400 mm.

Mild steels, case hardening steels, hardened steels, spring steels, alloyed and micro-alloyed steels, HLE steels, etc.

Slitting, annealing and skin pass possibilities.

Not forgetting non-ferrous metals, which we would also be happy to help you with: slit strips with thicknesses ranging from 0.1 to 5 mm and widths ranging from 5 to 1,600 mm, and blanks with thicknesses ranging from 0.3 to 6 mm and widths ranging from 300 to 2,100 mm

Mindful of your requirements, we deliver pursuant to DIN-EN standards and your most demanding specifications.

up to top